StellarSan Sanitiser 500ml - (Phosphoric Based)
100% Food Grade non-rinse sanitiser that can be diluted to 330L with our dual chamber mixing bottle compartment. Simply twist off the small measuring compartments lid, squeeze the bottle and it will start to fill that chamber only.
Perfect for santising your brewing equipment and surface areas. Not suitable for use on wood, unglazed porcelain or other porous materials. Not suitable for use on soft metal such as aluminium, copper or brass.
Instructions for use: Remove all debris, food particles and soil from the surface by a pre-flush, scrape, or soaking. We highly recommend using a PBW / Sodium Percarbonate solution to remove stubborn solid debris from your brewing equipment.
Then thoroughly wash surface with detergent then rinse with potable water.
Prepare a set amount of water first in your dilution jug/bucket then add the corresponding amount of StellarSan at 1oz/5gallons or 1.5mL/1Liter. Adding the water first aids in overfoaming when filling from a tap, and also helps prevent seal and washer exposure to acid burn.
Apply on surface with a mop, cloth sponge, spray or immersion.
When correctly diluted this solution will add 300ppm of dodecylbenzenesulfonic acid and 780ppm of phosphoric acid.
Do not use on wood, unglazed porcelain or other porous materials. Not suitable for use on soft metal such as aluminium, copper & brass.
Causes eye damage or skin burns.
Harmful if swallowed or absorbed through your skin or inhaled.
Do not get in eyes, skin or clothing. Always wear protective gear such as eye goggles and gloves when using this product.
Do not mix with chlorine based sanitisers or chlorinated based cleaners.