Shopping cart
Search
Brewing Equipment
1000 ml Reagent Bottle Borosilicate Glass (1000 ML)
REAGBOT1LT
$10.50
Out of stock
These Reagent Bottles are made from the same heat resistant laboratory borosilicate glass as Erlenmeyer Flasks.They are ideal for use in making small starters or yeast rehydration.They cannot be used on a stovetop or burner.
PLEASE NOTE: Due to the fragile nature of the glass, we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
PLEASE NOTE: Due to the fragile nature of the glass, we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
500 ml Reagent Bottle Borosilicate Glass (500 ML)
REAGBOT
$5.50
Out of stock
These Reagent Bottles are made from the same heat resistant laboratory borosilicate glass as Erlenmeyer Flasks.They are ideal for use in making small starters or yeast rehydration.They cannot be used on a stovetop or burner.
PLEASE NOTE: Due to the fragile nature of the glass, we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
PLEASE NOTE: Due to the fragile nature of the glass, we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
Air Stone (Stainless 0.5 micron) Barbed
SSAIRSTONE0.5MN
$23.50
Out of stock
High quality Stainless Steel air stone for carbonating kegs & aeration of wort.
Air Stone (Stainless 2 micron) Barbed
SSAIRSTONE2MN
$23.50
Out of stock
High quality Stainless Steel air stone for aeration of wort & carbonating kegs.
Air Stone MFL (Stainless 0.5 micron)Threaded
SSAIRSTONE0.5MNFL
$28.50
Out of stock
Our carbonating air stone now comes with MFL fitting option for easy cleaning.
You will also need either a Swivel Nut & Barb Kit
or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)
You will also need either a Swivel Nut & Barb Kit
or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)
Air Stone MFL (Stainless 2 micron)Threaded
SSAIRSTONE2MFL
$28.50
In stock
Our oxygenation air stone now comes with MFL fitting option for easy cleaning.
Please note: You will also need either a Swivel Nut & Barb Kit
or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)
Please note: You will also need either a Swivel Nut & Barb Kit
or our preference a Female Adaptor 1/4" FFL x 5/16" (8mm)
AirLock (3 piece)
AIRLOCK
$3.50
Out of stock
3 piece airlock - Easy to clean & convert to a blow off tube.
Bag - Fine Mesh 6" x 8"
BAG6/8
$5.95
Out of stock
Hop Bag - for fermenter or keg. The fine mesh keeps the majority of hop material
contained. Perfect for <30gm of pellets. For whole hops choose the 9x12" size.
contained. Perfect for <30gm of pellets. For whole hops choose the 9x12" size.
Bag - Fine Mesh 9" x 12"
BAG9/12
$6.50
Out of stock
Hop Bag - Great for additions of pellet hops during the boil. The fine
mesh fabric keeps a majority of hop material from entering your fermenter.
It also works well for dry hopping in the keg.
mesh fabric keeps a majority of hop material from entering your fermenter.
It also works well for dry hopping in the keg.
Bag - Medium Mesh 24" x 24"
BAG24/24
$8.50
In stock
Grain Bag - Good for brewing with whole hops or large amounts of grain,
especially mini-mashes. There is no drawstring on this size bag.
especially mini-mashes. There is no drawstring on this size bag.
Bag - Medium Mesh 8" x 15"
BAG8/15
$6.95
In stock
Good for steeping up to 1kg of grain or 90 gm of hops.
Bottle Rinser
MBBOTRIN
$36.50
Out of stock
Bottle Rinser. Use for sanitising your bottles. Can be mounted on top of plastic bottle tree. The clear dish is the reservoir to hold the sanitising solution . Hold the bottles upside down on white shaft and press down to inject sanitiser.
Bottles PET Brown (ctn 15)
MBPETBOT
$15.00
In stock
Brown PET Beer Bottles 740 ml. Ctn of 15. Includes screw caps.
Brew Belt - Heat Belt
MBBREWBE
$48.50
Out of stock
This 30 Watt heating belt is just what you need to keep your fermenter warm during the
winter months. Simply move up or down the fermenter to adjust the heating or combine
with our TempMate Controller for for precise temperature control.
winter months. Simply move up or down the fermenter to adjust the heating or combine
with our TempMate Controller for for precise temperature control.
Butterfly Valve (Tri Clover Compatible)1.5"
SANITBUTVALVE
$60.00
$85.80
In stock
3-Position Butterfly Valve
Tri-Clover Compatible
Pull lever lock, can be set to 3 different open positions
Can be cleaned in place
No pockets for particles to hide
Recommended for use on vessel outlets & fermenters
Carboy -PET (11.4L) Vintage Shop Brand
ES103125
$35.90
Limited stock
These are the ideal carboys for passionate beer and winemakers.These carboys do not use any plasticizer and are made with 100% Virgin material. Made with Food grade materials and BPA free.Ideal for secondary fermentations of both wine and beer. Also perfect for bulk aging wine.
Carboy -PET (23L) Vintage Shop Brand
ESBB23L
$54.90
Out of stock
These are the ideal carboys for passionate beer and winemakers.These carboys do not use any plasticizer and are made with 100% Virgin material. Made with Food grade materials and BPA free.Ideal for secondary fermentations of both wine and beer. Also perfect for bulk aging wine.
Counter Pressure Bottle Filler (Stainless Steel with Ball Valve)
COUNTPRESSFIL
$119.00
Out of stock
This newly designed counter pressure bottle filler features a special valve
on top that allows CO2 or beer to flow down the same stainless tube,
directly to the bottom of the bottle. If you prefer quick release fittings, you
can replace the barbs with these Straight Adaptor 1/4 NPTF x 5/16 (8mm)
Please note: Current stock has a brass relief valve - this doesn't come in
contact with the beer you'll be drinking, so has no negative effect.
on top that allows CO2 or beer to flow down the same stainless tube,
directly to the bottom of the bottle. If you prefer quick release fittings, you
can replace the barbs with these Straight Adaptor 1/4 NPTF x 5/16 (8mm)
Please note: Current stock has a brass relief valve - this doesn't come in
contact with the beer you'll be drinking, so has no negative effect.
Crown Hot Water Urn 40L (Concealed Element)
CI-HW40TC
$295.00
Out of stock
Crown Hot Water Urn with concealed element - Our preference for boiling wort.
Constructed from high quality stainless steel & incorporating a thermostat
control & boil dry protection. These urns are suitable for HLT's & Kettles
Constructed from high quality stainless steel & incorporating a thermostat
control & boil dry protection. These urns are suitable for HLT's & Kettles
Crown Seals - Gold 250pk
MBCARSEA
$7.95
In stock
Standard Crown Seals - Bottle Caps Gold 250pk. 26mm diameter.
Crown Urn - Site Gauge Kit (40cm)
CIGAUGEKIT
$21.50
Limited stock
This is a replacement site gauge kit for the Crown Urn, but can also be used to
put a weldless site gauge in any thin walled vessel. Just drill a 10mm hole to fit.
Please note: This item will not fit in a 500gm satchel.
put a weldless site gauge in any thin walled vessel. Just drill a 10mm hole to fit.
Please note: This item will not fit in a 500gm satchel.
Crown Urn - Site Gauge Tube (40cm)
CIGAUGETUBE
$10.90
Out of stock
Replacement site gauge for the Crown Urn. Simply unthread the old tube from
the elbow & screw in the replacement. One end is threaded to match the elbow.
Please note: This item will not fit in a 500gm satchel.
the elbow & screw in the replacement. One end is threaded to match the elbow.
Please note: This item will not fit in a 500gm satchel.
Demijohn/Carboy Glass 11lt
DEM11GLASS
$45.00
Out of stock
Demijohn/Carboy Glass 11lt. Neck diameter approx 33mm ID.
Note: this item is only available for pick up from store.
It cannot be shipped.
Note: this item is only available for pick up from store.
It cannot be shipped.
Demijohn/Carboy Glass 23lt
DEM23GLASS
$69.00
Limited stock
Demijohn/Carboy Glass 23lt. Neck diameter approx 33mm ID.
Note: this item is only available for pick up from store.
It cannot be shipped.
Note: this item is only available for pick up from store.
It cannot be shipped.
Erlenmeyer Flask 3L (New Larger Size)
ERLNMYRFLASK2L
$37.50
Out of stock
A great value borosillicate glass flask. You can move from boil on the stove
straight into a cold water bath without cracking.
PLEASE NOTE: Due to the fragile nature of the flask, we cannot ship by satchels.
Please select Auspost or Courier parcel service at checkout.
straight into a cold water bath without cracking.
PLEASE NOTE: Due to the fragile nature of the flask, we cannot ship by satchels.
Please select Auspost or Courier parcel service at checkout.
Erlenmeyer Flask 5L
ERLNMYRFLASK5L
$49.00
Out of stock
A great value borosillicate glass flask. You can move from boil on the stove
straight into a cold water bath without cracking.
PLEASE NOTE: Due to the fragile nature of the flask, we cannot ship by satchels.
Please select Auspost or Courier parcel service at checkout.
straight into a cold water bath without cracking.
PLEASE NOTE: Due to the fragile nature of the flask, we cannot ship by satchels.
Please select Auspost or Courier parcel service at checkout.
False Bottom 12" (Stainless)
FB12INCH
$69.90
In stock
Domed False Bottom for a 50L keg or 10 gallon (38L) Rubbermaid style cooler.
Also suitable for most large mash tuns.
Stainless Steel mesh dome with a stainless elbow
Also suitable for most large mash tuns.
Stainless Steel mesh dome with a stainless elbow
False Bottom for Crown Urn SS
CISTRAINER
$45.00
Limited stock
False Bottom Stainless Steel for Crown Urn . Fits 40 litre Crown urns. Keeps the BIAB bag off the bottom of the urn to stop bag from burning. Diameter 290 mm. Height 45 mm.
Fast Rack - 12 Rack (rack only)
FASTRACK12-RACK
$12.90
Out of stock
Fast Rack - 12 Rack with out tray
Fermentasaurus - SS Float & 60cm Silicone Dip Tube
FERMENTSAURFLOATNTUBE
$17.50
In stock
60cm silicone dip tube and stainless float. This is a replacement part for the fermentasaurus pressure kit but can also be used to fit a floating dip tube to a normal corny keg.
Fermenter Tap -SNAP TAP
MBTAPSSNA
$9.95
Out of stock
Fermenter Tap - SNAP TAP. 3/4" BSP Thread. Fits most plastic fermenters and cubes.
.
.
Funnel 30cm Plastic with Mesh Screen
FUNNEL30CM
$19.90
Out of stock
Funnel 30cm Plastic. Comes with a wire mesh filter that clips easily in and out of the funnel.
GEN 1 GRAINFATHER
GEN1GRAINFATHER
$890.00
$1,000.00
Limited stock
GEN 1 GRAINFATHER MANUAL CONTROLLER
The Grainfather is an all-in-one All-Grain brewing system designed to declutter your brew cave and put everything you need in one compact package. No need to take your craft outside, with this fully electric system you are safe to brew indoors! The Grainfather system is the perfect brewing companion for both new and experienced All-Grain brewers looking to streamline the brewday experience.
Grain Bag - For brew In A Bag (BIAB)
BIAB
$24.90
Out of stock
Commercial Grade Grain Bag for BIAB. NEW IMPROVED DESIGN - SAME PRICE!!!
More open weave (230% increase), more heavy duty (100%+ increase).
Manufactured from food grade nylon with reinforced seams.
8 x reinforced lifting loops with draw string to secure bag to top of pot.
Tapered shape for easy lifting & draining. 485mm diameter top,
350 mm diameter round flat bottom & 700mm deep/long.
Fits our urns, 70L Kettles & 100L kettles.
Grain Bag - With Draw String 50 x 65 CM
BAGKKLARGE
$9.95
In stock
Economical Grain Bag - With Draw String Approx 50 x 65 CM. Good for around 3-4 kg of grain. Perfect size for a 19 litre pot.
Grain Mill - Maltmuncher 2 Roller- with Hopper and Handle
MILLMALTMUNCHER
$165.00
Out of stock
Maltmuncher 2 Roller Grain Mill. Cold rolled steel rollers with aluminium body and hopper. Comes complete with crank handle and flat packed hopper. Hopper capacity approx 3 kg of base malt.
Grainfather Brewing System
GRAINFATHER
$1,300.00
Out of stock
The Grainfather, is your all in one brewing system to make beer from grain. The sleek look, user friendly design, and innovative features, make this your perfect brewing companion for both experienced and beginner all grain brewers. The system features a stainless steel body and grain basket with temperature controller, recirculating pump and wort chiller.
Grainfather Graincoat
GRAINFATHERCOAT
$79.50
Limited stock
This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature during your brew during cooler times of the year.
Grainfather Sparge Water Heating Urn 18 lt
GRAINFATHERSPARGE
$159.00
Out of stock
The Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18 L of water. This makes the process easier, start heating your sparge water when you begin the mash to ensure it is ready for when you need to sparge. Once water is at required temperature, it will hold that temperature until changed or turned off.
Grolsch Bottle Silicone Seal 30pk
GROLSCHRUBBERGASKET
$6.50
Out of stock
Grolsch Bottle Silicone Seal 30pk
Heater Pad (Brew Cellar/ Morgans)
HEATPADESS
$55.00
In stock
Heater Pad (Brew Cellar/ Morgans Brand ) Ideal for fermentation of Beer, Wine & Wash, this is a high quality plastic heat pad. 25 Watts 3 year replacement warranty. This Heater pad is designed for winter brewing, or for brewing in colder climates. Located underneath your fermenter, this low profile Morgan’s heater pad will prevent your brew from stalling due to temperature drop during fermentation. Best used in conjunction with a Temp Controller.
Heating Element - 2200W Stainless Steel
ELEMENT2200W
$49.50
Out of stock
Stainless steel heating element rated at 2200W. These elements are perfect for use
in your home brew kettle or hot liquor tank. NEW IMPROVED MODEL.
Please note: Power cord sold separately.
in your home brew kettle or hot liquor tank. NEW IMPROVED MODEL.
Please note: Power cord sold separately.
Hop Spider SS Basket
HOPSPIDERBASKET
$29.50
Out of stock
Perfect for containing hops while brewing beer and prevents hops getting into your chiller or fermenter!The spider sits over the edge of your kettle or keggle.
Hop/Grain Blocker
MESHTUBE
$24.95
In stock
All stainless, heavy duty, multi-purpose mash/boil screen
12" in length, 1' in diameter, 16 gauge mesh with 1/2" BSP fittings.
This Bazooka style screen is perfect for mash tun or kettle.
12" in length, 1' in diameter, 16 gauge mesh with 1/2" BSP fittings.
This Bazooka style screen is perfect for mash tun or kettle.
Hopsock Large (250 micron)
HOPSOCKSEF250ML
$19.95
In stock
Probably CraftBrewer's most popular product - Throw away those hop bags -
Can also be used as a grain bag
Can also be used as a grain bag
HopSock Jumbo (250 micron)
HOPSOCKSEF250MJ
$24.95
Out of stock
Double the length of the Large Hopsock for those big batches.
Hopsock Large (500 micron)
HOPSOCKSEF500ML
$19.95
In stock
Twice the mesh size of the standard sock. Perfect for plugs/flowers while still being
good for pellets.Throw away those hop bags - Can also be used as a grain bag
good for pellets.Throw away those hop bags - Can also be used as a grain bag
Hopsock Jumbo (500 micron)
HOPSOCKSEF500MJ
$24.95
Limited stock
Twice the length & mesh size of the standard sock for those big batches.
Perfect for plugs/flowers while still being good for pellets.
Perfect for plugs/flowers while still being good for pellets.
Hydro Test Tube - Jar White Base With Cap (ALLA)
HYDROJARALLA
$9.90
In stock
Lightweight Plastic Hydro Test Jar / Tube. Removable screw on base and cap. Tube length approx 320 mm. This tube will accommodate most hydrometers.
Hydrometer Final Gravity - (Final Gravity)
HYDROMETERFG
$44.50
Out of stock
Precisely read your finishing gravities in beer with this narrow-range, highly accurate hydrometer. The scale range is only .990-1.020, but the individual gradients are extra large allowing for an easy read. Length approx 300mm.
Hydrometer Test Tube (Red Base)
MBHYDTES
$8.90
Limited stock
Sturdy plastic 2 piece Hydrometer Test Tube. Tube length approx 250 mm. Will work with our standard hydrometers.
As the tube is made from plastic it is not designed for use with hot liquid.
As the tube is made from plastic it is not designed for use with hot liquid.
Imake Pail Type Fermenter with Lid 30L
BC55580
$34.50
Out of stock
Imake Pail Type Fermenter with push on Lid 30L.
Jug Set - 5 piece
MBJUGSET
$43.50
Limited stock
Jug Set - 5 piece. Contains 1 x 5 litre, 2 litre, 1 litre, 500 ml and 250 ml plastic jugs.
Magnetic Drive Pump
MAGPUMP
$90.00
Out of stock
New Model now with 1/2" BSP Male Thread
A cheaper alternative to the March Pump. Constructed from foodgrade materials, it
handles wort at boiling temperature (rated to 120c). The impeller housing is made
from polysulfone & the fittings are now 1/2" BSP Male Thread. Will require wiring.
A cheaper alternative to the March Pump. Constructed from foodgrade materials, it
handles wort at boiling temperature (rated to 120c). The impeller housing is made
from polysulfone & the fittings are now 1/2" BSP Male Thread. Will require wiring.
Mash Tun 56 lt Complete
MASHTUN56LTKK
$239.00
Out of stock
56 litre cooler style Mash Tun. Complete with 12" SS False Bottom and internal plumbing connected to a SS 2 piece 1/2" Ball Valve. These coolers work very effectively as mash tuns, with very little temperature loss over the course of a 60 min+ mash.
MILL MALTMUNCH BASEBOARD Base Board for Grain Mill
MILLMALTMUNCHBASEBOARD
$22.50
Out of stock
This is a Bamboo Base Board for the MaltMuncher Grain Mill (2 Roller)
Total Dimensions:
450 x 340 mm, 15mm thick
Hole Dimension:
115 x 70 mm
(screw holes 140mm apart)
(requires 2x M6 bolts to mount to the two roller mill, not included)
Note: Does not include Mill
MillMaster MiniMill (Stainless Steel Grain Mill)
MASHMASTMILLSS
$279.00
Out of stock
MillMaster MiniMill. New design, now with fluted rollers.The only fully adjustable geared roller mill on the market.
•130mm (5"approx.) precision machined rollers
•39mm (1 1/2") diameter rollers
•420 Hardened Stainless Steel Fluted Rollers as Standard, no rusty rollers.
•130mm (5"approx.) precision machined rollers
•39mm (1 1/2") diameter rollers
•420 Hardened Stainless Steel Fluted Rollers as Standard, no rusty rollers.
Millmaster MiniMill Hopper
MASHMASTMILLHOPR
$67.95
Limited stock
New Design Mashmaster Hopper.
This heavy-duty metal hopper is designed for use with MillMaster Mills.
Fits both knurled and fluted roller models. Holds approx 5 kg of base malt grain.
Note: Mill not included.
Oxy Wand SS 0.5 Micron Stone (0.5 Micron)
OXYWAND0.5MICRON
$47.50
Out of stock
The OxyWand™ is a new take on existing Oxygen wands. Featuring a 24" long 1/4" stainless tube, this wand is made with a flared end to mate directly with existing flared oxygen stones.
PLEASE NOTE: Due to the length of this item we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
PLEASE NOTE: Due to the length of this item we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
Oxy Wand SS 2 Micron Stone (2 Micron)
OXYWAND2MICRON
$47.50
Limited stock
The OxyWand™ is a new take on existing Oxygen wands. Featuring a 24" long 1/4" stainless tube, this wand is made with a flared end to mate directly with existing flared oxygen stones.
PLEASE NOTE: Due to the length of this item we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
PLEASE NOTE: Due to the length of this item we cannot ship by satchels.
Please select Auspost Parcel or Courier Parcel service at checkout.
Peristaltic Pump Roller & Pin Assembly
PUMPPERTRLPN
$9.50
In stock
Replacement Roller & Pin assemby for our Peristaltic Pump.
PET Bottle Caps - (60 pk)
MBPETCAP
$7.90
In stock
PET Bottle Caps - (60 pk) Repalcement caps for PET beer bottles.
Plate Chiller (Chillout MkIII 30 Plate)
PLCHILL30
$139.90
Out of stock
A fast way to chill your wort to yeast pitching temperature to get your fermentation off to a quick and healthy start. The ChillOut is a plate type heat exchanger, a miniature version of the plate chillers that the pros use.
Racking Cane - Stainless 1/2" x 26" (Includes Red Tip)
RACKCANESS1/2
$19.90
Out of stock
Constructed from 304 stainless steel. Will not break, crack, or discolor. Comes with a red tip that reduces trub pick up during siphoning. 26" from tip to top of bend however the overall length of the tubing is 30".
Racking Cane - Stainless 3/8" X 21" (Includes Red Tip)
RACKCANESS
$16.90
Out of stock
Constructed from 304 stainless steel. Will not break, crack, or discolor. Comes with a red tip that reduces trub pick up during siphoning. 21" from tip to top of bend however the overall length of the tubing is 25".
Racking Cane Clip 1/2"
RACKCANECLIP1/2
$6.90
In stock
Holds 1/2'' racking cane and clips to carboy or bucket. Great for holding the siphon off the bottom when starting your transfer.
Racking Cane Clip 3/8"
RACKCANECLIP3/8
$5.90
In stock
Holds 3/8'' racking cane and clips to carboy or bucket. Great for holding the siphon off the bottom when starting your transfer.
Rambo LPG Regulator Hose
LPGHOSE
$25.00
$45.00
In stock
Braided LPG Hose for all gas burners. 1/4 F/swivel Cone X 1/4 M/BSP 1800mm hose length. Gas Components Australia Part No. 13-B12221800.
Roboratchet Pulley
ROBOBREWRATCHETPULLEY
$10.50
Out of stock
This handy pulley is made from strong polypropylene rope and heavy duty carabiner clips for a secure hold. Ideal for BIAB or to suspend the RoboBrew malt pipe. Excellent for hanging all sorts of devices.
The ratchet mechanism is easy to use and only requires single hand operation. Newer RoboBrews will have a notch for the carabiner to centre on the lifting handle, with older models these clamps or two cable ties can be used to keep it centered as shown in the photos.
10mm (3/8") Rope
113kg (250lb) weight rating
Sight Glass 2 pc Set Polycarb with 1/2" BSP Fitting
SIGHTGLASSPOLYKK
$13.50
Out of stock
These simple sight glass kits have been designed so they can be easily dismantled and cleaned.The sight glass itself is not made from glass, it is made from robust polycarbonate.
Silicone Gasket ID 20mm
SILGASKET
$1.90
In stock
High temperature, heavy duty Silicone Gaskets, 3mm thick with a wide sealing area.
Perfect for sealing valves when converting eskys into mash tuns
& for sealing ball valves etc through kettle & HLT walls.
Perfect for sealing valves when converting eskys into mash tuns
& for sealing ball valves etc through kettle & HLT walls.
Siphon Spray Wort Aerator
SIPHNAER
$6.50
Out of stock
Increase dissolved oxygen in your wort. Attach this aerator/diffuser to
the end of your transfer tubing when filling your fermenter.
the end of your transfer tubing when filling your fermenter.
SPRAY BOTTLE 1l
PPCRATE29L
$4.25
Out of stock
Handy for cleaning or sanitising
Trigger may come in different colours
SS Head For Magnetic Drive Pump
MAGPUMPSSHEAD
$47.50
Out of stock
Replacement Stainless Steel head for Magnetic Drive Pumps. 1/2" BSP threads. Can be retro fitted to this www.craftbrewer.com.au/shop/details.asp Magnetic Drive Pump.
SS Immersion Chiller 14 Mtr
ES203145
$155.00
Out of stock
Stainless Steel Immersion Chiller. 14 Metre tube length. 12.7mm OD tube. Garden hose can be fitted directly onto the tube ends and secured with a hose clamp.
SS Keggle 58 lt with Bulkhead & Ball Valve
KETTLEKEGGLE
$265.00
In stock
58 lt Keggle with Bulkhead and Ball valve.
Stainless Steel Hop Tube
HOPTUBESS
$19.90
Out of stock
This hop tube is ideal for addling larger amounts of hop pellets or flowers to a keg or kettle. The fine mesh will prevent large particles from blocking the dip tube, pumps or chillers.
It will hold up to approximately 150g of hop pellets, allowing for some space to allow full extraction of the hop oils.
Ideal for IPA's and dry hopping in the keg, can also be used for fruits, wood chips, spices and more. Includes a small ring so it can be hung for the keg lid or side of the vessel.
Made from quality 304 Grade Stainless Steel
Tube Size: 6.6cm diameter, 29.7cm tall
Std Power Cord - for Heating Element
ELEMENTPCORD
$9.95
Limited stock
Standard power cord.
Fits our Stainless steel heating element rated at 2200W. lead
Fits our Stainless steel heating element rated at 2200W. lead
Super Auto Bench Capper Replacement Standard Capping Bell
CAPPERBELLSUPERAUTOSTD
$14.70
In stock
Super Auto Bench Capper Replacement Standard Capping Bell. Replacement bell for standard 26mm caps / crown seals.
Super Automatica - Tirage Capping Bell (For 29 mm Tirage Caps For Champagne Bottles )
ES103167
$14.70
Limited stock
Syphon with Bellow & Tap
SYPHONBELLOW
$24.90
Out of stock
Top Quality Italian Made Syphon with Bellow and Tap. 1/2" (12.7mm) ID Vinyl Hose. For cool liquids only. Not suitable for use with hot wort. If you are sick of using those dodgy Auto Syphons this is the Syphon you need.
Tap - Italian Barrel Tap - Large Spout
TAPQS12
$9.95
In stock
Tap - Italian Barrel Tap - Large Spout. 3/4" BSP Thread. Spout size approx 20mm OD.
Tap - Italian Barrel Tap - Small Spout
TAPQS8
$9.95
In stock
Tap - Italian Barrel Tap - Small Spout. 3/4" BSP Thread. Spout size approx 10mm OD.
Thermowell Weldless 100mm
THERMWELLWLDLS100
$44.95
In stock
For adding a thermowell to a pot or other thin walled vessel,
Fits our stocked temperature controllers.
Fits our stocked temperature controllers.
Brewing Equipment
Filter by:
Clear All
Min:
$0.00
Max:
$1,300.00
$0
$1300